Introduction of Gravity Gold Centrifugal Concentrator
Gravity Gold Centrifugal Concentrator is a modern type of gravity concentrator, it’s easy to operate and high recovery. It is recommended to separate the alluvial gold, vein gold and placer gold. The recovery can be as high as 98%, especially for the nature gold sand.
Structure Of Gravity Gold Centrifugal Concentrator
1. Fluidization water is introduced into the concentrate cone through a series of fluidization holes.
2. Feed slurry is then introduced through the stationery feed tube and into the concentrate cone. When the slurry reaches the bottom of the cone it is forced outward and up the cone wall under the influence of centrifugal force.
3. The slurry fills each ring to capacity to create a concentrating bed. Compaction of the concentrating bed is prevented by fluidization process.
4. The flow of water that is injected into the rings is controlled to achieve optimum bed fluidization. High specific gravity particles are captured and retained in the concentrating cone.
5. Upon conclusion of the concentrate cycle, concentrates are flushed from the cone into the concentrate launder through port.
Parameter of Gravity Gold Centrifugal Concentrator
Model |
STLB20 |
STLB30 |
STLB60 |
Feeding Capacity (T/h) |
0.6 |
2-3 |
8-12 |
Fluidization Water Required (m3/h) |
2-3 |
3-5 |
7-10 |
Slurry Water Required (m3/h) |
1.5-4 |
5-7 |
8-12 |
Feeding Density (%) |
0-50 |
0-50 |
0-50 |
Feeding Size (mm) |
0-3 |
0-3 |
0-5 |
Concentration Cleaning Up Cycle |
Vein gold 1-3 Hours Placer gold:2-6 Hours |
||
Concentrate Weight (Kg) |
2 |
3-5 |
10-20 |
Power Requirements (Kw) |
0.75 |
1.5 |
4 |
Approximate Shipping Weight (Kg) |
205 |
380 |
1100 |
Approximate Crated Shipping Dimensions (mm) |
914×700×900 |
1160×885×1165 |
1820×1450×1700 |
Picture of Gravity Gold Centrifugal Concentrator
Please mark the product